The Jupiter Biostone Plus Filter has been improved!

As well as using improved cutting edge filter medias, the Biostone Plus has also added another all-natural element which helps prevent scale build up inside all of the hoses and water cell of the water ionizer. This is a great new feature. In addition the new Biostone Plus filter has special filtration to improve taste.

This filter is manufactured in the United States.  It is made for United States water, in that it will filter out chloramine [chlorine + ammonia] and fluoride. Both of these chemicals are toxic and both are commonly found to be added as part of most water companies’ treatment processes in the US. These are also hard to filter out of the water, due to size and stability, and so take specialized filter media to do the trick.  The Biostone Plus filter has always had superior filtration quality, but now is even better due to the new filter media in use.

Vortex Hydraulics

The Biostone Plus filter uses the natural properties of “vortex hydraulics” to ensure optimum performance.  A vortex is “a spiral motion of fluid in a limited area, especially a whirling mass of water or air that sucks everything near it towards its center.”  This allows for a filter to be able to clean the water more thoroughly.

Filtration

With the new improvements in the Biostone Plus filter, comes an improvement of contaminant removal and improved flow rate!  There is an increased contact time and reduced resistance of granulated filter beds.  The more contact time the water has with the filter media, the better the filtration will be.

So, not only does the Biostone Plus filter out chlorine, chloramines, and heavy metals, it also prevents hard water scaling and improves the taste of your water!

After over 16 years of drinking alkaline ionized water, I can say with conviction that the very best thing I could give to myself or a loved one is a WATER IONIZER! Give yourself and your family the gift of health this year!

Wishing You Water Wellness!
Sincerely,
Cathie LoGrasso

Email Us: Support@alkaline-water-plus.info
Website Home: http://www.alkalinewaterplus.com
Copyright © 2006 – 2011 Alkaline Water Plus
Call for a “Best Price Quote” 1-888-MY-ALKALINE [692-5525]

Or call my [Cathie's] CELL: 314-452-9560

Tweet This Post

Not all water ionizer filters are alike!

Before you buy your water ionizer, you might want to see how its filter-changing steps are, compared with the other water ionizers. I’ve provided you with a water ionizer filter comparison video followed by some commentaries below.

This video shows how to remove and replace…

filters from the Tyent, KYK and Jupiter water ionizers.

Some Water Ionizer Filter Insights:

• The easiest filter to replace was the Jupiter. You just pop it in and out.
• The next easy one down would be the Tyent. You just unscrew/screw it. Although it takes a little coordination to get it started.
• I didn’t show the Chanson in this video, but I did in an earlier blog post. It’s very similar to the Tyent in that it screws/unscrews.
• The KYK is the most complicated. You need to carefully remove the computer chip from the top of the filter. Be careful, because the entire operation of the KYK will go awry if the filter chip isn’t reading correctly. You’ll just get an error message until you fix the problem.
  • Once the chip is out, turn the kyk 1/4 turn and then wiggle and pull till it’s out.
  • But watch out for the water. The filter is in upside-down and so water pours out as you are removing the filter. It would help to do this in or over the sink.

Water Ionizer Filters: There are Other Differences

I’ve included links to the information pages for each of the water ionizers’ above filter pages. There are differences in cost and in what the filters will filter out.

• Athena Water Ionizer: The first filter [on the left] is usually a sediment filter: the Athena #1 Sediment Filter [49.95], and the right filter is either the Biostone .01 [89.] filter or the Biostone Plus [79.]. If you have a municipal water company supply and treat your water, then choose the Biostone Plus. If you use well-water, use the Biostone .01. I’ve seen people use two Biostone Plus filters. This would be for those people doubly concerned with chloramine and fluoride in their water. The Biostone Plus is the only filter to my knowledge that is specifically designed to filter out chloramine*. So this is definitely a “PLUS” for that filter!

*[Chlorine is an unstable element and because of that is very easy to filter out of water -- it bonds with the carbon in the cheap carbon-block filters and out it goes. Chloramine, on the other hand, is a stable compound of chlorine plus amonia (yuck!), and because of its stability it is difficult to filter out and special filter media must be used to get rid of it. Chloramine is a fairly recent compound being used by water treatment companies, and because it's far cheaper to use than chlorine...most municipalities these days are using it. Call the number on your water bill and ask them if they treat your water with chlorine...or look it up online by typing "water quality report" and your city/state [most municipalities post their water quality reports online now).]

• KYK Water Ionizer: The KYK filter set costs $129.50 and filters out fluoride, heavy metals, chlorine, and more.
• Tyent Water Ionizer: The Tyent filter set costs $85.00 and filters out chlorine, heavy metals and more.

Tweet This Post